Does your phone case look more like a greasy frying cocotte than a stylish accessory? Can oil stains be completely removed? Understanding why some Android or iPhone cases tend to get oily more quickly than others is crucial. Let’s guide you on how to clean oily phone cases.
Method 1: Try Microfiber Fabric
Microfiber cloths are commonly used to clean counters and other surfaces. However, we can also utilize them to clean grimy phone accessories. The soft material of these cloths is intended to pick up dirt, oil, and other debris without scratching or harming your phone case.
Below is a method for using microfiber to clean an oily phone case:
- Remove the case from your phone
- Wipe off excess oil and dirt
- Dampen the cloth with water
- Add soap (Optional)
- Wipe down and dry your cover
- Clean and store your microfiber cloth
Method 2: Use Soap and Water
The second solution to clean an oily phone case is to use soap and water. This method requires simple household items and only takes a few minutes. To begin, gather the following materials: Gentle dish soap, warm water, sponge.
Use mild dish soap, as harsh chemicals can damage your phone case. Also, avoid using hot or boiling water as it may cause warping or melting of the plastic material.
Mix a small amount of dish soap with warm water in a bowl. Dip the sponge into the soapy mixture and gently scrub the entire surface of the phone case. Pay extra attention to any areas with stubborn oil stains or buildup. Avoid using excessive force while cleaning, as it may scratch the surface of your cover.
Once thoroughly cleaning all sides of the case. Rinse it under tap water to remove all traces of soap suds from every crevice. After rinsing. Let it air dry completely before reattaching it to your iPhone or Android. It is essential to ensure that no residual moisture is left on the surface before putting your phone back.
This method works best for complex plastic cases rather than silicone ones since it attracts more oils and dirt particles, which might require additional cleaning methods.
Method 3: Rubbing Alcohol
Using rubbing alcohol is a great step to make your phone case shine, and clear. It helps remove excess oil from the surface but also disinfects and sanitizes it. To start the process, you will need a bottle of isopropyl alcohol, a clean cloth, and a small bowl. Start by pouring some rubbing alcohol into the bowl. Then, take your phone case and place it in the bowl. Make sure that it is fully submerged in the liquid.
Let the phone case soak the rubbing alcohol for 6-11 minutes. This will help loosen any stubborn oils and grime on the surface of your case. Gently use a clean cloth to wipe down your cover entire surface. The rubbing alcohol will help dissolve any remaining oils, grease, and dirt on the case. Pay extra attention to corners and edges where oil buildup tends to accumulate.
For tougher stains or residue, you can use an old toothbrush lightly dipped in rubbing alcohol to scrub away at those areas. Be gentle but firm enough to remove stubborn grime without harming your phone case.
Once you have thoroughly cleaned all parts, rinse it off under running water to remove any remaining residue.
Method 4: White Vinegar
White or distilled vinegar is a household staple used for various cleaning purposes. But not recommended for phone screens. Its acidic nature makes it cleaner for removing oil and grime from your case.
Here’s how:
- Create a cleaning solution
- Remove the cover
- Dip or spray the solution onto the case
- Let it sit
- Scrub away oil residue
- Rinse and dry thoroughly
Method 5: Baking Soda
Baking soda is another remarkable ingredient found in almost every household. It is excellent for baking and cooking and has powerful cleaning properties. In this method, we will use baking soda to create a paste that will remove grease and grime from your phone case.
To start, you will need to gather the following ingredients:
- 1 tablespoon of baking soda
- 1 teaspoon of water
- A clean cloth or sponge
Method 6: Commercial Phone Case Cleaner
If you have tried various methods to clean your phone case and still can’t get rid of the oil, grease, and other dirt. It is time to invest in a commercial cleaner. These products are also created to remove oil from phone cases without causing any damage.
Several types of cleaners are available including sprays, wipes, and gels. Before buying a product. It’s a good idea to read the label and follow the instructions for better results.
Conclusion
It is important to keep your phone case clean and free of oil to maintain its good looks. You can make your case appear brand new by using these 6 useful techniques to swiftly remove the shine caused by oily skin. Don’t forget to clean your case often so oils and bacteria don’t accumulate and potentially harm your phone. With some work, you can keep your case in perfect shape and give your phone a smooth, shiny appearance.